Mastering Potentiometers: Linear vs. Audio Taper - A Comprehensive Guide for Appropriate Control Selection

Mastering Potentiometers: Linear vs. Audio Taper - A Comprehensive Guide for Appropriate Control Selection

Understanding the difference between linear and audio taper pots when to use which kind for which type of control.

Are you confused about the difference between linear and audio taper pots? Don't worry, you're not alone! As a guitar player, it's important to understand the different types of pots and when they're used for different types of controls.

First up, what does a potentiometer do in a guitar? In basic terms it allows a player control over either the volume or tone of a pickup (or combination of pickups) by means of a variable resistor that passes a certain amount of the pickup’s signal to ground (in the case of a volume pot) or via a capacitor to ground (tone pot).

Linear pots have a consistent resistance throughout their range of motion. This means that - in technical terms - the resistance when the knob is turned half-way is exactly half of the resistance when it's turned all the way (the 0 position on your knob).

The issue with linear pots is that the human ear doesn't process 50% resistance as 50% volume or tone. And so when the electric guitar was being developed, manufacturers started to look at other options that would provide a more pleasing roll-off of volume or tone to the human ear - and the "audio" taper pot was born.

Audio taper pots have a logarithmic resistance curve. This means that the volume or tone will increase or decrease more rapidly at the beginning of the knob's range, and then level off towards the end.

These days debate rages over whether a linear or audio taper pot is best - especially for tone controls. At JFG we use audio taper pots for both volume and tone controls because we find them most usable - and we're not alone in that. Almost all major manufacturers use audio taper for both volume and tone.

But does that mean the linear taper pot is obsolete? Not at all. If you are using a pot to blend the signal between two pickups, a linear taper pot is the way to go.

We offer a whole range of options for guitar controls, including push/pull pots to expand your sonic arsenal, and we only use full-size CTS pots.

返回博客

按你的方式去做

打造你的梦想吉他

我们相信吉他是演奏者的延伸,演奏者应该能够拥有一把像他们一样独特、大胆、独一无二的吉他。

打造你的梦想吉他
  • What do DC resistance, inductance and capacitance tell us about how an electric guitar pickup will sound?

    What do DC resistance, inductance and capacitan...

    When it comes to electric guitar pickups, there are several key factors that determine how they will sound. DC resistance, inductance, and capacitance all play a crucial role in shaping...

    What do DC resistance, inductance and capacitan...

    When it comes to electric guitar pickups, there are several key factors that determine how they will sound. DC resistance, inductance, and capacitance all play a crucial role in shaping...

  • Easy Guitar Mods: Kill Switch

    Easy Guitar Mods: Kill Switch

    Easy mods that you can do yourself to unlock new tonal possibilities from your guitar. Today we're going to talk about the kill switch. This isn't really a tonal change...

    Easy Guitar Mods: Kill Switch

    Easy mods that you can do yourself to unlock new tonal possibilities from your guitar. Today we're going to talk about the kill switch. This isn't really a tonal change...

  • What is capacitance and how does it affect guitar tone?

    What is capacitance and how does it affect guit...

    When it comes to shaping the sound of an electric guitar, many factors come into play. One of the key elements that can significantly impact the tone of a guitar...

    What is capacitance and how does it affect guit...

    When it comes to shaping the sound of an electric guitar, many factors come into play. One of the key elements that can significantly impact the tone of a guitar...

1 / 3